Shelf Flag Production

Custom shelf flags on Ongrofoam base — in flat, 3D, and LED-lit versions

The images are illustrations; the appearance of the final product may differ from the design mockup.

Shelf Flag Production

In shelf flag production, we manufacture a horizontally protruding advertising device mounted on the edge of the shelf strip, made from Ongrofoam (foamed plastic board), which draws the shopper’s eye directly to the product — even amid a crowded product range, heavy advertising noise, and packed shelves.

We produce standard double-sided printed flat panels, 3D designs, and LED-lit versions alike, tailored to individual requirements, starting from 50 pieces.

  • From 50 pcs minimum
  • 5–10 business days turnaround
  • Custom graphics accepted
  • Free design guide included

Why is a shelf flag effective?

The shelf flag — known as a “shelf flag” in English — is a horizontally protruding POS device typically attached to the edge of the shelf strip with rubber lamella holders. Unlike a wobbler, it doesn’t hang down; instead, it extends sideways from the edge of the shelf, positioned perpendicular to the shopper’s direction of movement. This position is what makes it effective.

In supermarkets, drugstores, and specialty shops, the shelf flag is typically used to highlight a product’s promotion, novelty, or key feature. With a clear, simple message — price, promotion, or a “new product” notice — it helps shoppers make quick decisions.

Material and printing

The shelf flag is made from Ongrofoam, a rigid, easily printable board material that holds up well under store conditions. Printing is done using UV technology — the vivid colors won’t fade from store lighting or heat. It’s lightweight yet sturdy enough to resist deformation during display, ensuring a lasting appearance.

Size: determined by the retail chain

The size of the shelf flag isn’t entirely a free choice: most retail chains have internal policies specifying what size device can be placed on the shelf. Common sizes in use are 250 × 900 mm, 200 × 800 mm, and 150 × 600 mm, though custom sizes are also available. Before ordering, it’s advisable to confirm the exact size with the specific retailer.

Flat and 3D versions

The simpler and most common solution is the flat shelf flag: a printed Ongrofoam panel that attaches to the shelf with a rubber lamella holder. For campaigns requiring a stronger visual impact, a 3D version is also available. In this case, a second, smaller Ongrofoam element is mounted on the base panel, held away from it by a barely visible 2 × 2 cm foam spacer. The offset is small — just a few centimeters — but the visual effect is significantly stronger: certain parts stand out from the surface, giving the shelf flag a three-dimensional, tangible quality.

LED option

For special orders, small LEDs can be built into the 3D element, drawing attention to the highlighted section with direct, focused light. This version can provide extra visibility especially in locations with night-time opening hours or poor lighting. Using flashing LEDs makes the display even more dynamic.

Product-integrated version

One of the most unusual shelf flag solutions is one where the actual product itself is incorporated into the device. A recess cut into the Ongrofoam panel holds the real packaging or product — the cutout follows its contour precisely. A rotating packaging element can also be attached, drawing the shopper’s attention through movement.

Technical details

MaterialOngrofoam
PrintingUV printing
ShapeFlat panel, 3D (raised front), LED or product-integrated version
Typical size250 × 900 mm, 200 × 800 mm, 150 × 600 mm (depending on retail chain)
Turnaround time5–10 business days
Min. quantity50 pcs
Print file submissionPrint-ready PDF, 300 dpi

Request graphic design too!

Grafikus kollégáink sok éves tapasztalatukkal készséggel állnak rendelkezésedre, hogy megvalósítsák elképzelésedet. Csak jelöld az ajánlatkérésnél, hogy kérsz tervezést is.

Frequently asked questions

What's the difference between a shelf flag and a wobbler?

Both are shelf-mounted POS devices, but they work in different directions. The wobbler hangs downward and catches attention through its movement. The shelf flag extends horizontally from the edge of the shelf, positioned perpendicular to the shopper’s direction of movement — so a person walking down the aisle looks directly at it. The two devices can also be combined for the same product.

What size should I order a shelf flag in?

The size is determined by the specific retail chain’s requirements. The commonly accepted sizes are 250 × 900 mm, 200 × 800 mm, and 150 × 600 mm, though these may vary by chain. If the shelf flag is intended for your own store or a location without size restrictions, it’s worth discussing beforehand which size best suits the product and the shelf conditions.

What is a 3D shelf flag, and when should you choose it?

The 3D shelf flag includes a second Ongrofoam element held away from the base panel by a small foam spacer. This offset of a few centimeters gives the device depth and a tangible, three-dimensional effect — certain parts literally stand out from the surface.

Can LEDs be built into a shelf flag?

Yes, for special orders, small LEDs can be added alongside the 3D element to provide focused lighting on the highlighted section, creating a dynamic effect with flashing.

What's the turnaround time, and what's the minimum order quantity?

The minimum order quantity is 50 pcs. Turnaround time is typically 5–10 business days, which may be somewhat longer for 3D versions. For urgent orders, please contact us.

Request your personalized quote!